2004.09 - 2008.06西北工业大学材料科学与工程学院 工学学士
2008.09 - 2014.06西北工业大学 材料科学与工程学院 工学博士（硕博连读）
2014.07 - 至今重庆大学 材料科学与工程学院 材料加工系 讲师[1]
主要研究方向
六方晶体结构金属的塑性变形机制；
航空结构材料钛合金的锻造和热处理。[1]
科研项目预变形对钛合金两相区冷却过程中次生α相形核的影响；国家自然科学基金青年基金；2016.1~2018.12；负责人
1.
预变形对钛合金两相区冷却过程中次生α相形核的影响；国家自然科学基金青年基金；2016.1~2018.12；负责人
论文及专著期刊论文
K. Wang*, M. Li, Q. Liu, Evolution mechanisms of the primary α and β phases during α/β deformation of an α/β titanium alloy TC8, Materials Characterization, 120 (2016) 115-123
K. Wang*, D.L. Sun, Y.L. Wu, R.L. Xin, M.Y. Wu, Q. Liu，Correlation between flow behavior and microstructure evolution during α/β deformation of TA19 titanium alloy, Advanced Engineering Materials，
K. Wang*, M.Q. Li, Characterization of discontinuous yielding phenomenon in isothermal compression of TC8 titanium alloy, Trans. Nonferrous Met. Soc. China, 26(2016) 1583-1588.
K. Wang, M.Q. Li. Morphology and crystallographic orientation of the secondary α phase in a compressed α/β titanium alloy.Scripta Materialia, 68 (2013) 964-967
K. Wang, M.Q. Li. Effect of hot deformation and heat treatment on secondary α phase evolution of TC8 titanium alloy. Materials Science and Engineering A, 613 (2014) 209-216
K. Wang, M.Q. Li. Flow behavior and deformation mechanism in the isothermal compression of the TC8 titanium alloy. Materials Science and Engineering A, 600 (2014) 122-128.
K. Wang, M.Q. Li, J. Luo, C. Li. Effect of the δ phase on the deformation behavior in isothermal compression of superalloy GH4169. Materials Science and Engineering A, 528 (2011) 4723-4731.
K. Wang, M.Q. Li, C. Li. The δ and austenite phase evolution and model in the solution treatment of superalloy GH4169. Materials Science and Technology, 29 (2013) 346-350
李晨, 李淼泉, 王柯. 固溶处理GH4169合金的高温变形行为. 航空学报, 31 (2010) 368-376
H.M. Li, M.Q. Li, J. Luo, K. Wang, Microstructure and mechanical properties of heat-treated Ti–5Al–2Sn–2Zr–4Mo–4Cr,Trans. Nonferrous Met. Soc. China, 25(2015) 2893-2900.
W.J. He, C. Li, B.F. Luan, R.S. Qiu, K. Wang, Z.Q. Li, Q. Liu, Deformation behaviors and processing maps of CNTs/Al alloy composite fabricated by flake powder metallurgy, Trans. Nonferrous Met. Soc. China, 25(2015) 3578-3584.
1.
K. Wang*,
2.
K. Wang*,
3.
K. Wang*,
4.
K. Wang
5.
K. Wang
6.
K. Wang
7.
K. Wang
8.
K. Wang
9.
王柯
10.
K. Wang,
11.
K. Wang
会议论文K. Wang
, M.Q. Li. Secondary a Phase Evolution in the Isothermal Compression and Heat Treatment of TC8 Titanium Alloy.PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing
.
Published Online: 6 SEP 2013. DOI:10.1002/9781118792148.ch325K. Wang*,
B.F. Luan, M.Q. Li, Q. Liu, Phase dependent restoration mechanisms of TC8 titanium alloy during hot compression in the two phase region,IOP Conf. Series: Materials Science and Engineering,
89 (2015) 012047[1]